Applications
Six sectors, six different sets of material requirements. Pick yours to see what the industry demands, which ranges we quote for it, and the documentation your customer will audit.
Every Sector Fails Differently
A bakeware mat and a battery-pack gasket are both silicone, but they are not the same material. Each page below covers what that industry actually demands, which ranges we quote for it, and the documentation your customer will ask for.
Kitchenware & Bakeware
Cake moulds, baking mats, spatulas and ice trays that survive the oven, the freezer and the dishwasher.
4 material requirements AUAutomotive & EV
Turbo hoses, connector seals, spark-plug boots and battery-pack gaskets that stay flexible under the bonnet.
4 material requirements MDMedical & Healthcare
Catheters, seals, diaphragms and wound-care components in platinum-cured LSR.
4 material requirements ELElectronics & Keypads
Keypads, connector seals, potting and thermal parts where the silicone does electrical work.
4 material requirements BIInfant & Maternity
Nipples, teethers, feeding tableware and breast-pump parts under the strictest food-contact regime.
4 material requirements ISIndustrial Sealing
Gaskets, O-rings, profiles and silicone bags where a seal failure means downtime.
4 material requirementsWhich Property Matters Most in Your Sector?
Use this as a starting point for the conversation, not as a specification. The grade still has to be matched to your part geometry and process.
| Industry | Heat | Cold | Food Safety | Electrical | Tear | Colour |
|---|---|---|---|---|---|---|
| Kitchenware & Bakeware | ●●● | ●●● | ●●● | — | ●● | ●●● |
| Automotive & EV | ●●● | ●●● | — | ●● | ●●● | ● |
| Medical & Healthcare | ●● | ●● | ●●● | ● | ●● | ●● |
| Electronics & Keypads | ●● | ●● | — | ●●● | ●● | ●●● |
| Infant & Maternity | ●●● | ●●● | ●●● | — | ●● | ●● |
| Industrial Sealing | ●●● | ●●● | — | ● | ●●● | ● |
● = relevant ●● = important ●●● = critical
From Requirement to Sample in Three Steps
Send the requirement
Part drawing or description, hardness target, service temperature, and the standard your customer audits against. If you only have the application, that is enough to start.
Get a grade recommendation
We reply with a specific compound, its TDS and the compliance documents that apply — or tell you honestly that a different elastomer suits the job better.
Sample, then scale
Free sample for qualified projects, dispatched within 48 hours. Once the trial part passes your validation, we move to trial order and mass supply.
